General Information

Important Safety Notes:

• We recommend 2–3 people for a smoother assembly.
• With assistance, carefully flip the unit onto its feet.
• Handle carefully to avoid pinching fingers.
• Apply slight pressure during assembly where noted.

Returns:
If you wish to return your product, please contact us first — we can often help resolve the issue right away.
If a return is still necessary, it must be initiated with the retailer where the product was purchased.

Need Help or Replacement Parts?

Although great care has been taken to ensure proper packaging and handling of this product, occasional issues can occur.

If you need replacement parts, assembly assistance, or have questions about the product, our customer service team is ready to help:

• Website: https://parts.nychbrands.com
• Email: support@encloscreens.com
• Phone: 704-892-5222 or 877-234-6196

Customer service agents are available 9am–5pm EST, Monday–Friday.

For Quick Assistance:

• Have reference item number AZ18045
• Provide the specific part name
• Include the batch lot number found on the end of the box

Detailed Dimensions & Specifications

Product Specifications:

• Overall Width: 80¼ in
• Overall Length: 41½ in
• Overall Height: 50⅞ in

To ensure longevity of your wooden product, please watch this video on how to best care for your new Dual Bin Garbage Enclosure.

Posts

P-1 — Post 1 (1)

2⅛" x 2⅛" x 50¾"

P-2 — Post 2 (1)

3" x 2⅛" x 50¾"

P-3 — Post 3 (1)

2⅛" x 2⅛" x 50¾"

P-4 — Post 4 (1)

3" x 2⅛" x 50¾"

P-5 — Post 5 (1)

2⅛" x 2⅛" x 50¾"

P-6 — Post 6 (1)

2⅛" x 2⅛" x 50¾"

Boards

A BRD111 — Top Board (8)

5⁄8" x 4½" x 38¼"

B BRD082 — Wood Board (30)

5⁄8" x 4½" x 38¼"

C BRD112 — Front Bridge Board (2)

5⁄8" x 2½" x 38¼"

D BRD113 — Middle Board (2)

5⁄8" x 4½" x 38¼"

E BRD114 — Gate Door Bottom Board (2)

5⁄8" x 4½" x 38¼"

F ACC140 — Corner Brace (9)

4¾" x 2⅛" x 1⅜"

G ACC141 — Inside Corner Brace (3)

6¼" x 2⅛" x 1⅜"

H — Gate Wood Spacer (2)

Hardware & Accessories

I — 1⅜" Wood Screw (24)

J — ⅝" Wood Screw (4)

K — 1" Self-Tapping Screw (12)

L — ½" Self-Drilling Screw (8)

M — ⅝" Self-Drilling Screw (64)

N — Washer (16)

O — Spring Lock Washer (8)

P — Nut (8)

Q — Socket Screw (8)

R — Plastic Spacer (64)

S — Caster Wheel (2)

T — Magnet (4)

T-1 — Magnet Tape (4)

U — Bottom Bridge (2)

V — Gate Frame (4)

W — Gate Stop (2)

X — Middle Post Cap (2)

Y — Corner Post Caps (4)

Z — Hex Key (2)

Z-1 — Wrench (1)

Z-2 — Drill Bit (1)

It’s normal to have a few hardware pieces left over after assembly. We include extras for your convenience.

• Assemble on box or other smooth surface to prevent scratching.

• Locate Post 1 (P-1) and Post 6 (P-6) and stand posts upright.

• Insert (1) Top Board (A BRD111) into channels of Post 1 (P-1) and Post 6 (P-6).
• Ensure that the hole on Top Board (A BRD111) is facing down. Follow with (2) Plastic Spacers (R), one on each side.

• Insert (7) Wood Boards (B BRD082) followed by (14) Plastic Spacers (R), one on each side.
• Insert (1) Top Board (A BRD111) lastly to finish off the panel.

• Insert (8) ⅝" Self-Drilling Screws (M) into pre-drilled holes in channels of Post 1 (P-1) and Post 6 (P-6) to secure Top Boards (A BRD111).

• Locate Post 2 (P-2) and Post 4 (P-4) and stand posts upright.
• Assemble on box or other smooth surface to prevent scratching.

• Set (1) Middle Board (D BRD113) between Post 2 (P-2) and Post 4 (P-4) and secure using (4) ⅝" Self-Drilling Screws (M).
• Ensure that the hole on Middle Board (D BRD113) is facing down.

• Set (1) Middle Board (D BRD113) between Post 2 (P-2) and Post 4 (P-4) and secure using (4) ⅝" Self-Drilling Screws (M).

• Ensure that the hole on Middle Board (D BRD113) is flush with the bracket while screwing into place.

• Assemble on box or other smooth surface to prevent scratching.

• Locate Post 3 (P-3) and Post 5 (P-5) and stand posts upright.

• Insert (1) Top Board (A BRD111) into channels of Post 3 (P-3) and Post 5 (P-5).
• Ensure that the hole on Top Board (A BRD111) is facing down. Follow with (2) Plastic Spacers (R), one on each side.

• Insert (7) Wood Boards (B BRD082) followed by (14) Plastic Spacers (R), one on each side.
• Insert (1) Top Board (A BRD111) lastly to finish off the panel.

• Insert (8) ⅝" Self-Drilling Screws (M) into pre-drilled holes in channels of Post 3 (P-3) and Post 5 (P-5) to secure Top Boards (A BRD111).

• Start with Post 1 (P-1) and Post 6 (P-6) panel.
• Slide (1) Top Board (A BRD111) into Post 1 (P-1) bracket.

• Lower Post 2 (P-2) bracket onto opposite end of Top Board (A BRD111).

• Insert (1) Top Board (A BRD111) into upper brackets of Post 1 (P-1) and Post 2 (P-2).

• Insert (8) ⅝" Self-Drilling Screws (M) into pre-drilled holes in brackets of Post 1 (P-1) and Post 2 (P-2) to secure Top Boards (A BRD111).
• This will connect panels with Posts 1 & 6 and Posts 2 & 4.

• Slide (1) Front Bridge Board (C BRD112) into shorter brackets of Post 4 (P-4) and Post 6 (P-6).
• Insert (4) ⅝" Self-Drilling Screws (M) into pre-drilled holes to secure Front Bridge Board (C BRD112).

• Slide (1) Front Bridge Board (C BRD112) into shorter bracket of Post 4 (P-4).
• Slide (1) Top Board (A BRD111) into bracket of Post 2 (P-2).

• Lower Post 3 (P-3) and Post 5 (P-5) brackets onto Top Board (A BRD111) and Front Bridge (C BRD112).

• Slide (1) Top Board (A BRD111) into brackets between Post 3 (P-3) and Post 4 (P-4).
• Insert (8) ⅝" Self-Drilling Screws (M) into pre-drilled holes in brackets to secure Top Boards (A BRD111).

• Insert (4) ⅝" Self-Drilling Screws (M) into pre-drilled holes in brackets from the inside to secure Front Bridge (C BRD112).

• Attach (9) Corner Braces (F ACC140) as shown using (18) 1⅜" Wood Screws (I).
• You will use 2 screws per corner brace to secure.

• Attach (3) Inside Corner Braces (G ACC141) as shown using (6) 1⅜" Wood Screws (I).
• You will use 2 screws per inside corner brace to secure.

• With assistance, carefully flip your unit on it's feet.

• Install (2) Gate Stops (W) using (4) ⅝" Wood Screws (J) as shown.
• Ensure that the edge is flush to the top of the wood.

• Place (2) Bottom Bridges (U) between posts as shown and use the Drill Bit (Z-2) to pre-drill holes into the posts.
• Ensure that the Bottom Bridges (U) are sitting flush inside of your front post channels.

• Insert (8) ½" Self-Drilling Screws (L) into the pre-drilled holes to secure the Bottom Bridges (U) to the posts.

• Assemble on box or other smooth surface to prevent scratching.

• Locate (2) Gate Frames (V) and stand upright.

• Insert (1) Wood Board (B BRD082) into channels of Gate Frames (V).
• Follow with (2) Plastic Spacers (R), one on each side.
• Slide each piece down as far as it will go in the channel.

• Insert (7) Wood Boards (B BRD082) followed by (14) Plastic Spacers (R), one on each side.
• Insert (1) Gate Door Bottom Board (E BRD114) lastly to finish off the gate panel.
• Alternate boards and plastic spacers, finishing with Gate Door Bottom Board (E BRD114).

• Apply slight pressure and insert (8) ⅝" Self-Drilling Screws (M) into pre-drilled holes as shown.
• Repeat steps 26-29 to create second gate.

• Ensure the four holes on Gate Door Bottom Board (E BRD113) are on the bottom inside Front Post (P-4).

• Ensure your gate is flush with Front Bridge Board (C BRD112).
• Use Gate Stopper (W) to help hold gate standing up.
• Place (2) Gate Wood Spacers (H) under your gate as shown.

• Using your hinge as a template, pre-drill 6 holes on the side of your gate with the included Drill Bit (Z-2) as shown.

• Secure the hinges to the Gate Frame (V) using (6) 1" Self-Tapping Screws (K).

• Ensure your gate's flush with the top of your unit by lowering or raising the Caster Wheel (S) by using Wrench (Z-1)

Adjusting Castor Wheel Height

• If the wheel is not contacting the ground, use one hand to hold the bottom portion of the caster while rotating the wrench until the wheel firmly contacts the ground

• Warning: Handle carefully so as not to pinch fingers.

• It's normal to have a few hardware pieces left over after assembly. We include extras for your convenience.

• Email: support@encloscreens.com
• Phone: 704-892-5222 or 877-234-6196
• Text: 980-580-6508